From the video, we could understand that the Redmi Note 7 is not lovely much different from other phones in terms of the arrangement of its internals. The device features a glass frame and so, to disassemble, the rear glass screen has to be removed. Other components are held in place by a few screws. One spectacular thing about the gadget is that the USB Type-C port is on a secondary board and so, shouldn’t be too hard to change if it receives faulty. There are two ribbon cables connecting the main board to the secondary board and other lower parts which includes the loudspeaker, microphones, haptic motor, and the secondary board which houses the USB-C port.

A recent article of ours had dwelt on the digital camera protrusion of the Redmi Note 7 as a result of the 48MP sensor. This, we observed. might deliver the glass covering the lens glass to shatter smoothly if the cameraphone falls down. The teardown proves the lens cover on the dual camera setup is a single part, what makes it easy to replace if the glass cover on the digital camera has broken. Further, the teardown video also highlights the 48MP Samsung ISOCELL digital camera camera sensor as well as the Sd 660 AIE chipset.

Source: link

The post Redmi Note 7 special Teardown video appeared first on Handyschaft.

Whenever the Nubia X, the new Vivo NEX Dual Display Edition is the second cameraphone to arrive with two displays, one on the front and one of the back, in order to minimize the bezels with no the need of a notch. The Display typically represents the hardest component to remove whenever it arrives to disassembling a cameraphone. Indeed, according to the initially teardown of the initially flagship made in China, the phone is hard to disassemble and repair. The disassembly process is hard particularly due to the fact you require to remove 2 displays, but not only for that.

The pictures published show that Vivo NEX Dual Display Edition has a quite busy motherboard with several areas directly attached to it. We are talking about both the displays, the triple digital camera module found on the back and attached to the motherboard separately, antennas and more. Therefore, guys who need to disassemble the smartphone will have to remove two glued displays as well as all those connectors. In order to remove the displays, a heat gun is required. The teardown highlighted the motherboard as nicely as all the sensors of the rear triple camera.

Vivo NEX Dual Display is equipped with a 12 MP key scanner with an f/1.8 aperture and OIS, a secondary 2 MP depth sensor with an f/1.8 aperture and a 3D TOF Digital camera with an f/1.3 aperture. It has with no front cameras because the secondary Display allows using the rear digital cameras as selfie cameras as well. According to the experts who made the teardown, Vivo NEX Dual Display is not easy to disassemble and repair, Therefore you really should be careful not to break it and it is recommended not to proceed any disassembly on your own unless you are an expert technician.






Source: link

The post Vivo NEX Dual Display disassemble displays how hard it is to be repaired appeared first on Handyschaft.